Concrete cutting in Redondo Beach CA - straight cuts right where you need them
Need part of a slab removed, a trench or a new wall opening? We make a straight, clean cut after checking what's inside.
Concrete cutting with a plan first
Concrete cutting in Redondo Beach usually means using a diamond-blade saw to remove or open up a slab, sidewalk or wall with a straight, controlled cut. Most calls start with a cracked or sunken section that has to go, a trench for a new line or a wall that needs a doorway, often ahead of a new concrete driveway or concrete patio.
The price turns on how much we cut, how thick the concrete is and whether it's a floor or a wall, and the schedule turns on the checks we make first. Your estimate shows the prep and what's included.
What our concrete cutting covers
These are the cutting jobs we handle most, from taking out a broken section to opening a wall for a new door.
Slab removal
When a cracked or sunken section has to go, we cut a straight line around it, so the concrete left behind keeps a clean edge for the new pour.
Trenches
We cut two straight lines and break out the strip between them for a new pipe or line, so you don't lose the whole slab to run it.
Wall openings
We cut new door and window openings in concrete walls, once we know what's inside the wall and the opening has been approved.
Joint cuts
We saw control joints, straight grooves that give the slab a planned place to crack as it shrinks, instead of cracking wherever it likes.
Tell us what needs cutting
Send the surface, the rough length of cut and any drawings showing cables in the slab. We reply within one business day to set up a free estimate at your property, no obligation.
(424) 275-6479How we plan concrete cutting
We've done concrete work since 2020, and on a cutting job most of our care goes into what happens before the saw ever starts.
- Scanning before the saw. We look into scanning before the saw starts, because hitting steel, a pipe or a wire inside is the mistake to avoid.
- Cabled slabs wait for sign-off. Some slabs hold steel tension cables under stored force, so on those we wait for a structural engineer's approval before any cut.
- Dust down, drains kept clean. A state rule requires dust control on powered cuts, and slurry stays out of Redondo Beach storm drains, which run untreated to the ocean.
- Licensed and insured. We're licensed and insured, and when you compare crews, know that the state licenses concrete sawing and coring under its D-6 concrete-related services class.
- I come out myself. I look over the job and write the estimate myself, our crew works with me on site, and a call to (424) 275-6479 sets up the visit.
Serving Redondo Beach and nearby cities
Essential Redondo Beach Concrete is based in Redondo Beach and works in the cities around it, including Torrance and Hermosa Beach. If your city isn't listed, call (424) 275-6479 and ask.
From first call to walk-through
We explain each step before we ask anything of you, and we tell you what we learned about permits and the slab before any cutting starts.
The visit
After you call or send a note, I come out to look at the concrete and ask what the cut is for. I note the surface, how thick it looks and whether the slab may have tension cables inside.
The plan
I write up an estimate showing the prep, the finish and what's included. Before any cutting, we look into the permit question, scanning and whether utility lines need to be located and marked, and we tell you what we learned.
Cut and finish
Our crew sets up dust control, makes the cut and collects the slurry as we go. Before we leave, I walk the finished job with you so you can see the edges and the cleanup.
Concrete cutting questions in Redondo Beach
What is the best way to cut a concrete driveway or wall?
For a driveway, floor or sidewalk, a walk-behind saw is the usual choice, while a new wall opening calls for a track-mounted saw that rides a rail bolted to the wall. A walk-behind blade only reaches so deep, so a very thick slab may take more than one pass or a different method.
How do I make sure it's safe to cut into my concrete slab?
Start with a scan, which is good practice because it narrows down what's inside the slab. A scan alone can't prove a spot is completely clear, though, so it works best alongside the approved plans, utility information and any permits the job needs.
Do I need a permit to cut concrete in Redondo Beach?
That's something we check for your address before we cut, because the city's permit list doesn't name concrete cutting by itself. The city requires an Engineering Permit for listed work in the public right-of-way, such as sidewalks, driveways and curb and gutter, and the Redondo Beach Building Division at (310) 318-0636 handles permits and inspections on private property.
How much does concrete cutting cost in Redondo Beach?
Professional concrete cutting across the US usually costs about $3 to $10 per linear foot, a national figure rather than our price. Thick slabs that need extra passes, wall cuts and the checks before cutting are what move the number most. Your estimate at the visit gives you our figure for your cut.
Plan your Redondo Beach concrete work with us
Call (424) 275-6479 or use the form, tell us what's going in after the cut, and we'll set a time to come look.